As a homeowner, there are hundreds of things you would rather do than work on your yearly home maintenance checklist on weekends. However dull or frustrating the tasks may be, each item you check off the list is one more way to protect your home from future problems. Here are four yearly maintenance tasks you should never forget to do.
1. Refrigerator Coils
The condenser coils for your fridge need to be cleaned at least once a year to remove dust and cobwebs. By removing any accumulation on the coils, you can guarantee a longer refrigerator life and save money on energy costs. All it takes is a soft brush and a few minutes of your time.
2. Pest Spraying
Most homeowners complain about one or two pests each year, so why not take the offensive and have an exterminator Staten Island spray for ants, roaches, termites, and dozens of other possible pesky problems? Having the company spray in the spring and fall can keep your home insect and rodent free all year long.
3. Water Heater Drain
An easy way to add years to your water heater’s life is by draining the sediment that accumulates at the bottom of the tank each year. The residue can create hot spots or cause the heating element at the bottom to fail. The project is an easy one, so why not do it while listening to your favorite podcast on Saturday morning?
4. Window Caulk
If your home’s windows have a wooden casing, the wood caulking around the glass panes can crack as your home ages. Once a crack appears, the brittle caulking can allow water into your home. To prevent potential problems, check your home’s window and door sealant every fall before winter storms in.
You can protect your house by completing your yearly maintenance task list, but sometimes you can’t get through the entire list. When you are short on time and can only accomplish a few things, make sure you consider the items listed above.…
If you have newly renovated or built a building, you are already making some big changes in your life. So, while you are prepared to make changes, why not go a little further? Here are three additional changes you can make to your building that could improve your quality of life.
1. Parking Lot
Parking lots are often a subject of complaint from those who have to use them. Typically, the complaint is that the lots are not large enough to accommodate the number of cars that it needs to. When you are looking for new asphalt South Bend IN, make sure you have enough space surrounding your building to expand the way you want to.
You might think that all lights should go on the ceiling and leave it at that. However, you can add so much atmosphere to a building by getting creative with where you place your lights. Hiding lighting in small spaces within your building can bring a room to life, and using natural light from windows gives a room a type of glow that you cannot attain from anywhere else.
Floors are used more than almost anything else in a building. People are constantly treading all over them using shoes that have been in potentially disgusting places. So, you likely want your floors to be as easy to clean as possible. Talk to your janitors and see which types of floors would be easiest for them to clean and consider switching if possible.
Remodeling and building are extensive processes that can take a lot out of you and the people who frequently use your building. However, as long as you have everyone’s best interests in mind, you should be able to get through the process as quickly and painlessly as possible.…
Millions, almost one-third, of households have septic systems. If you have never lived in a home with a septic system, you may not understand septic maintenance and what can and cannot be flushed down the toilet and drains, which may result in a system failure. If you notice puddles in your yard around your septic system, you may need to look for a septic company by searching “septic tank draining near me,” but what does draining entail?
Your Septic System
Septic systems teat the wastewater from your home, including the water from your toilets, sinks and washing machines. This waste is moved from your home through a pipe and into a septic tank. The solids or heavy materials move to the bottom of the tank, oils sit at the top and greywater collects in the middle of the tank. Then, the greywater is drained through a leach field, while the sludge and oils remain in the tank, preventing environmental contamination.
Your septic system should be monitored regularly. In fact, each year or two, you should have a septic company come out and inspect your system and test your well water and soil. The inspector will test the sludge and scum levels in your tank, check that your leach field is working properly and ensure your pipes are clear and working well. During these inspections, the company will tell you whether your system needs to be pumped out. In addition, you should watch for puddles in your yard, sewage smells and backups into your home.
Heathy tanks have active microbial systems that break down and remove sewage from your tank. However, even these systems require pumping every 1-3 years because the sludge and oil builds up in the tank.
During septic tank pumping, your tank will be cleaned of all sludge, water and scum. This waste may be taken to local sewage treatment plants or processing centers that treat it with chemicals.
Seek a reputable sewage company for regular sewage system maintenance, inspections and draining.…
Many industrial processes require painstaking precision. The equipment used to mix various chemicals to make compounds from pharmaceuticals to specialty solvents must be accurate. Slight deviations can cause problems in downstream processes or in the quality of end products. The methods by which these critically important elements are maintained include regular adjustment and careful monitoring. Specialty calibration equipment that has been tested to scientifically precise standards is used to accomplish these tasks.
National and international standards organizations maintain test equipment used to calibrate field instruments. Instrumentation technicians are normally responsible for regularly scheduled re-calibration of field devices. For instance, calibration cylinders Ontario may be sent to Measurement Canada laboratories or other recognized facilities to be checked for accuracy and calibrated. In the United States, the National Institute of Standards and Technology (NIST), part of the US Department of Commerce, serves the same function.
Field calibration equipment loses accuracy over time. The level of precision required of this equipment demands regular checks and certification. Deterioration in accuracy is caused by wear of internal parts and accidental damage during use. Requirements for regular comparison to recognized standards are triggered by different circumstances.
Changes in Field Conditions
Instrumentation technicians are often the reason that field equipment is sent for recalibration. These professionals work with the devices daily and often recognize when equipment begins to deviate from normal operation. Technicians normally have established procedures for requesting that field instruments be recalibrated.
Calibration equipment manufacturers typically publish guidelines and recommended procedures for the instruments they make and sell to industry. These guidelines are established based on the known mean time between failures of critical components in the equipment.
Legal Requirements for Recalibration
Some countries have formalized the requirements levied on industry to maintain accuracy in measurement devices. Laws are enacted to enforce these standards to ensure fairness and safety in commerce. Companies that provide products and services subject to these laws can be held accountable if they fail to follow the requirements spelled out within the legislation.
Critical accuracy is required by many different industries in the manufacture and sale of goods to the public. Maintaining a system of standards helps ensure fairness and safety for workers and customers of these industrial interests. Establishing standard operating procedures to enforce regular maintenance of instrumentation is a way to keep the scales of industry accurate.…
Receiving your pilot’s license can be a big day in your life. While it took many long hours to get to the point where you could own and operate a personal aircraft, the responsibilities don’t end when you receive your license. Part of your job when you get into the cockpit of your plane is making sure that the aircraft is in tip-top shape. Look over these basic maintenance tips to guarantee you are always following the right steps.
Oil Changes Are Key
Just like with your car, oil changes are key to successfully operating your plane. When oil has been sitting for too long, it no longer serves the purpose of lubricating the various working components of the plane’s internal systems. The oil becomes less clean in this state and can cause wear and tear to other parts. Change the oil regularly and you will be able to reduce the odds of a simple problem developing from old oil.
Look for Any Signs of Damage
When you’re flying high in the air, it isn’t easy to tell whether or not you’re coming in contact with small pieces of debris. Still, there are plenty of tiny dangers floating about the sky that can ding and nick your aircraft without you even noticing. Do a routine check of your plane each time you land to look for any potential damage. If you notice a tear of any kind, contact professionals who specialize in industrial welding Rahway NJ to have the problem rectified immediately.
Put a Plan in Place
No matter what maintenance routine you follow, you need to create a repeatable plan. Write down a checklist and keep it handy so that you can run through it whenever the time calls. Simple reinforcement can help you develop the best habits.
Owning a personal aircraft comes with a lot of responsibility. Take time to develop your own maintenance routine and learn how you can fly with a sense of confidence and pride.…
Before beginning a huge construction project, you have to first plan it. During this stage, project managers and vital experts in the process sit down and devise a carefully considered schedule and strategy for successfully completing the work. Here are three areas that are generally present in successful construction project planning.
1. Basic Tactical Planning
This first stage involves property and project owners devising a general strategic plan and establishing the direction of the entire effort. They decide what to build and pinpoint the construction site. Every other phase of project development is driven by these initial decisions.
2. Procedural Planning
In this stage, managers address the fundamentals of how the project will actually get done. They discuss who will do specific tasks, what equipment is necessary, and specific logistical details that will affect scheduling. An experienced structural engineer North Vancouver BC is a valuable resource for project managers defining specific procedures, as these experts study the overall goals and design the blueprints for the project. Their work informs other tactical decisions.
3. Master Planning
The final stage of planning funnels down to even more specific details. This stage sets dates and timetables. It also addresses a number of important points associated with the project.
- Adequate financial resources
- Permits and licenses
- Governmental involvement
- Public safety
The focus at this stage is to plan as closely as possible so that the project finishes on time and within the budget established early in the initial planning phase.
Planning for Success
Planning for large construction projects, whether they are dams or skyscrapers, requires a lot of thought. Devising strategies for building complex structures is usually done in multiple stages and is just as complicated and precise as the final completed structure will be. Finely-tuned strategies and details guide the entire project, from deciding the budget to buying the right parts for builders to complete the job. The ultimate goal is for the finished project to not only meet but to exceed expectations.…
Termite is a word that generates shudders in prospective homeowners. Any buyer should have a professional pest inspection as a contingency on any offer. However, even seasoned homeowners should be aware of the potential presence of these destructive insects. The following signs are strong indicators that you should call a professional pest service to evaluate whether your home has become a haven for termites.
Wings and Fliers
Keep an eye out after the first freeze for clouds of small flying insects. In the spring, look for dry, discarded wings around your windows or other wooden openings. They come from swarming termites that appear looking for places to start new colonies. Once they settle, you may not see them again.
Once established, these shiny white critters eat wood structures from the inside out. You may notice holes in some boards, but since the planks are within walls in most cases, the damage is invisible. If you hear new hollow sounds when you tap on walls, that may indicate termite destruction.
What you may notice are thin mud tubes or burrows running mostly up ground-level structures. Look for these travel paths in basements or foundations. Because these are signs of an invasion, you then should call in termite treatments Fort Myers FL for further evaluation.
Look for tiny light-brown droppings of digested wood near walls. Additionally, look for these as well as other evidence of termites anywhere you have wood structures or piles near your main house. Signs may include holes in the wood as well as the insects themselves. While you are at it, consider eliminating inviting woodpiles from your home’s proximity.
Termites are one of the most destructive pests. Their presence may result in the need to make expensive structural repairs to a house. If you are vigilant, and you consult with a pest control expert when you suspect the company of these invaders, you can usually mitigate the damage.…
The workplace has become more mobile than ever in today’s busy world of business and commerce. Traditional office jobs are still around but many workers now telecommute or find themselves in the field more than in the office. When workers go mobile many tools must become portable to accommodate this reality. Interestingly, there are a few unusual portable tools that many people have never heard of or seen. Here are two such mobile tools that are little known and support on the road occupations.
A portable hardness testing tool isn’t something you see every day for sure. This unusual gadget helps engineers and scientists determine the relative toughness of a material. Hardness, particularly of metals, is a critical element of many engineering tasks. This is particularly the case in fields such as quality control and assurance. Metals used in the construction of automobiles, structural elements and aerospace must withstand very demanding operational conditions. The properties of metal I-beams that make up supporting structures for a bridge or skyscraper must be capable of holding up under severe forces. The hardness of such a building element is related to the probability of its failure. These metal components can also weaken over time resulting in catastrophic failure. Obviously, it is difficult or impossible to remove such items and take them to a laboratory for testing.
Handheld Narcotic Analyzer
The world-wide problem faced by authorities tasked with enforcing drug laws and catching suspected smugglers prompted the invention of this unique tool. The analyzer is capable of definitively scanning and identifying almost 500 different controlled substances in the field. The device uses a testing method known as Raman spectroscopy. This technique is based on the unique light scattering properties of different molecules. A laser beam is trained on the substance to be tested and a small portion of the light that is scattered provides information about the specific chemical bonds between atoms and molecules. The wavelengths of this specific portion of the light corresponds to unique chemical bonds. This amounts to a kind of chemical fingerprint that identifies specific substances.
Unique portable tools that most people have never heard of point to the constant innovation being made in laboratories around the world. Enquiring minds are capable of amazing inventions that provide necessary tools in today’s mobile workplace.…